Dartboard Height and Distance Guide

Dartboard Height and Distance Guide

For a standard steel tip dartboard setup, the bullseye should be 5 ft 8 in from the floor and the throw line should be 7 ft 9.25 in from the face of the dartboard. These measurements help create a regulation-style setup for home practice, game rooms and casual league play.

Quick Answer

  • Bullseye height: 5 ft 8 in
  • Throwing distance: 7 ft 9.25 in
  • Measure distance from the face of the dartboard
  • Keep the board level and centered
  • Add wall protection before regular play

Standard Dartboard Height

The standard dartboard height is measured from the floor to the center of the bullseye. For steel tip darts, that measurement is 5 ft 8 in.

This is the most important measurement when mounting the board. Measuring to the top of the board or the cabinet can lead to an incorrect setup.

Standard Throwing Distance

The standard steel tip throwing distance is 7 ft 9.25 in from the face of the dartboard to the front edge of the throw line.

Measure from the board face, not from the wall. If your dartboard is inside a cabinet, the board face will sit forward from the wall, so this detail matters.

Diagonal Measurement Check

Some players use a diagonal measurement from the bullseye to the throw line as a second check. This can help confirm that both height and distance are correct.

However, for most home setups, measuring bullseye height and throwing distance carefully is enough.

Setup Checklist

Before playing, confirm:

  • The bullseye is 5 ft 8 in from the floor
  • The throw line is 7 ft 9.25 in from the board face
  • The board is level
  • The number ring is correctly positioned
  • The wall is protected
  • Lighting does not cast heavy shadows

Common Setup Mistakes

The most common mistakes are:

  • Measuring the throw line from the wall instead of the board face
  • Measuring board height to the top of the board instead of the bullseye
  • Mounting the board without wall protection
  • Playing in an area with poor lighting
  • Using darts that are too light or too heavy before learning a consistent throw

What Gear Helps With a Correct Setup?

A complete dartboard setup kit or cabinet set can make installation easier because the major pieces are designed to work together. A surround or cabinet helps protect the wall. A dartboard light helps reduce shadows and improves visibility.

Useful North Darts categories:

FAQ

What is the correct dartboard height?

The correct height for a steel tip dartboard is 5 ft 8 in from the floor to the center of the bullseye.

What is the correct dartboard distance?

The correct steel tip dartboard throwing distance is 7 ft 9.25 in from the face of the board to the throw line.

Do I measure from the wall or the dartboard?

Measure from the face of the dartboard. This is especially important when the board is mounted in a cabinet.

Is the setup different for soft tip darts?

Soft tip dartboards may use different distance rules depending on the board and game format. Always check the electronic dartboard's setup instructions.

How do I mark the throw line?

You can use floor tape, an oche marker, a mat or a dedicated throw-line strip. Make sure the front edge of the line is at the correct distance.

Should I add wall protection before playing?

Yes. Wall protection is strongly recommended for home setups, especially for beginners and family game rooms.

Ready to Set Up Your Board?

Shop North Darts dartboards, cabinets, surrounds and complete setup kits shipped from Canada: https://northdarts.com/collections/frontpage

Retour au blog